Price Range: From $84 pair

Product Return: Custom - No Returns

Usual Processing: 3-8 weeks

Ship: Albertville, AL

Warranty: Mfg Defects limited Lifetime

PlacerCraft PVC Board and Batten Exterior Shutters. Featuring Aertis Superior Technology, Shutters To Last A Lifetime!

• Fixed mount clear Lexan mounting hardware included.
• Shutter Widths Available: 8" to 20" wide. Widths range in 4" increments.
• Shutter Heights Available: 15" to 96" high.
• Shutter Thickness: 1" (2" w/Battens)
• Batten Height: 4" by 1" thick.
• Vertical Boards: 1" thick by 4" wide. Joined styles only.
• Mid-Batten optional up to 55" high, requires 3 battens 55" to 81" and 4 battens over 82". While you may choose to have fewer battens on these exterior board and batten shutters, choosing this will void the warranty.
• The look of wood without the upkeep!
• Painted, Primed or Unfinished - The choice is yours!
• PlacerCraft High-Density PVC unfinished material is paintable without priming.
• Feature Aertis Superior Technology

Installation: The shutters can be installed as fixed or operable panels. It must be installed in accordance with the mounting instructions provided in the packaging.

PlacerCraft PVC Featuring Aertis Superior Technology, Shutters To Last a Lifetime!

All materials must be used in accordance with the PlacerCraft Installation Guide. All Shutters must be painted/coated, and all raw material areas covered with a recommended paint. This must be maintained over the lifespan of the product.

Operable shutters:

• Shutters over 72” need hidden holdback/stays installed within 4 inches of the top of the shutter. Available in our hardware section.

• Shutters measuring 84” or greater must have a minimum of five (5) connection points to a wall. This includes top hinge, bottom hinge, two mid-hinges, and shutter holdback/stays.

• Shutters measuring under 84” must have a minimum of four (4) connection points to a wall. This includes top hinge, bottom hinge, mid-hinge, and shutter holdback/stays

Non-operable shutters:

• Never bolt shutter directly to a wall without a spacer or the fixed mount brackets that come with the shutters.

• Non-operable shutters require a minimum of six (6) penetrating fasteners per shutter. Fasteners must be placed within 3” of the top and bottom and within 3” of the center of the shutter. Or use the fixed mount brackets supplied with the shutters.

• Shutters require a ¾” minimum spacer between shutter and the wall. Or use the fixed mount brackets supplied with the shutters.

RETURN POLICY: Larson's PlacerCraft PVC Composite shutters are a custom product that is made for you after you have purchased. Our PVC Composite shutters are not returnable or exchangangeable, please order carefully as we cannot make any exceptions. Shortages, defective or freight damaged product will be repaired or replaced with the same options and sizes of your original order.